Wildlab.com

We added some new functions and fixed minor bugs.

• AdHoc adjustment for head height.
• AdHoc replacement for stem.
• Sample bikes are downloadable from our server.
  (We will add more sample bikes to our server. For the moment please use this service as “un-delete” for pre-installed bikes.)

Browse fittings.

How to browse fittings.

Here is the “Fittings view”.

Every time you start TestRides, you will see this screen. Fittings view can have 15 pages at same time. You can see other fitting by swipe action (or tap on the page-indicator on the bottom of the screen).

You can modify his / her riding position. There are three gray circles on his shoulder, palm and hip. In order to move them, first, tap on the circle and hold for a short time.
Then magnifier will be popped up. Now you can move your finger.

How to switch to other body / bike.

Tap “Bikes/Bodies list” button, select a bike or body on the list, then tap “Back” button. If the bike/body you selected is different from current one, you will see confirmation message.

Other functions.

Managing the bodies.

In the “Bodies list” screen, you can add, delete and modify body.

overview

The body consists of eight points.

1. grip center of fist
2. wrist
3. elbow
4. shoulder
5. hip
6. knee
7. ankle
8. sole on a cleat

What is she holding?
It is her favorite fitness gear . But why???
With this app, you can get your digitized body from photo. In order to find actual body size, you need to place something straight and enough long into the photo. And you need to know the item’s actual length. Floor-mop is also good for help.

All the points(eight on the body and two for the stick) should be aligned on the same plane. It will help to reduce error in measurement caused from distortion.

How to add new body.

Enter “New Body” screen by tapping “[+]” button on the “Bodies list (Edit mode)”.

Then you start to digitize body by tapping a button which is labeled “Open ‘Body Digitizer’”.

Step1, choose an image source for digitizing.

Select where your photo come from.

Step2, tell iPhone which the datum object is.

Drag and place two red triangles onto both ends of the stick.

Step3, enter datum’s actual length.

Step4, point position of joints on the body.

Drag and place eight red marks onto shoulder, hip, knee…

After you’ve done the four steps, you will back to “New Body” screen. Name for body and digitized info are required in order to save the body.

Managing the bikes.

In the “Bikes list” screen, you can add, delete, modify and duplicate bike.

How to edit existing bike.

By tapping bike name which you want to edit on the “Bikes list”, you will enter the “Edit Bike” screen .

Then tap the button which labeled “Open ‘Bike Builder’”. The “Bike Builder” begins.

The “Bike Builder” screen consists of seven sections.

1. Tyres, Wheelbase
2. Front(Rear) to Center
3. Crank, Bottom bracket
4. Seat, SeatTube
5. Frame
6. HeadTube, Folk
7. Head, Stem

You can move to next / prior section by swipe action as same as in the fittings view.

Size values are shown in the white rounded rectangle. Value labeled as “-” indicates value is empty.

When you tap the rectangle, “Value entry screen” will be shown. You can enter or delete value there.

How to duplicate existing bike.

You can make a copied bike from existing one. This helps you to make a new one which has different size of same model.

How to download bikes from server.

You can download pre-installed bikes from our server (www.wildlab.com).

What is “Default”?

You will see a “Default” mark on an icon in Bikes/Bodies list. These marked body and bike are used when you add new fitting. And you can change default body/bike by check “Set this body/bike as ‘Default’” in each detail page